Automotive Technology: Subaru-U - Degree

Limited Entry, Associate of Applied Science Degree Program mhcc.edu/AutomotiveTechnology

Faculty Advisers

Steve Michener: 503-491-7148 | Room IT52 | Steve.Michener@mhcc.edu
Eric Garvey: 503-491-7222 | Room IT53 | Eric.Garvey@mhcc.edu

Automotive Student

The Subaru-U program allows students to study at MHCC and gain work experience while training as service techs for Subaru dealers and repair shops. MHCC’s auto shops are filled with some of the finest, most up to date training supplies and equipment on the market.

The Subaru-U program is two full years of training, including fall, winter, spring and summer terms both years. Graduates will earn an AAS degree, as well as a full year of work experience in a dealer repair center. Subaru dealers and shops see MHCC students as their “service technicians of the future.”

Cohorts begin in fall (even years) and summer (odd years).

Program Outcomes

At the completion of this program, students should be able to:

  • Demonstrate safe shop practices and hazardous material handling
  • Diagnose and repair electrical systems
  • Diagnose and repair engine performance systems
  • Diagnose and repair emission systems
  • Diagnose and repair internal combustion engine systems
  • Diagnose and repair automatic transmission and transaxles systems
  • Diagnose and repair manual drive train and axles systems
  • Diagnose and repair brakes systems
  • Diagnose and repair automotive steering and suspension systems
  • Diagnose and repair automotive heating and air conditioning systems
  • Perform minor vehicle services

General education courses (such as math, writing, health, etc.) can be taken during any term, or before starting the program. 

Please note: All core (AM) courses must be completed with a grade of "C" or better, and must be completed within 5 years of starting the program.

Start in Fall or Summer

Plan of Study Grid
First QuarterCredits
AM103 Automotive Service Theory 2
AM104 Automotive Service Lab 1
AM105 Chassis Basic Theory 3
AM106 Chassis Basic Lab 1
AM112 Electrical 1 Theory 3
AM113 Electrical 1 Lab 2
AM114 Engines 1 Theory 2
AM115 Engines 1 Lab 1
 Credits15
Second Quarter
AM171 Chrysler MCAP, IMPORT Subaru-U E-Learning Fundamentals 1 1
AM281 Automotive Dealership Experience 1 6
MTH065
Beginning Algebra II (Course offered online) (or higher)
or Quantitative Reasoning I
4-6
 Credits11-13
Third Quarter
AM140 Drivetrains 1 Theory 3
AM141 Drivetrains 1 Lab 1
AM142 Chassis 2 Theory 3
AM143 Chassis 2 Lab 1
AM154 Electrical 2 Theory 3
AM155 Electrical 2 Lab 1
AM158 Engine Performance 1 Theory 3
AM159 Engine Performance 1 Lab 2
AM170 Automotive Project 1 1
 Credits18
Fourth Quarter
AM282 Automotive Dealership Experience 2 6
WR101
Workplace Communications I (Course offered online)
or Composition I (Course offered online)
3-4
 Credits9-10
Fifth Quarter
AM224 Engines 2 Theory 2
AM225 Engines 2 Lab 1
AM228 Engine Performance 2 Theory 4
AM229 Engine Performance 2 Lab 2
AM232 Electrical 3 Theory 3
AM233 Electrical 3 Lab 1
AM238 Air Conditioning Theory 3
AM239 Air Conditioning Lab 1
 Credits17
Sixth Quarter
AM283 Automotive Dealership Experience 3 6
Health and Physical Education requirement 3
 Credits9
Seventh Quarter
AM242 Electrical 4 Theory 3
AM243 Electrical 4 Lab 1
AM244 Drivetrains 2 Theory 2
AM245 Drivetrains 2 Lab 3
AM246 Engine Performance 3 Theory 3
AM247 Engine Performance 3 lab 1
AM248 Electric Vehicle Theory 2
AM249 Electric Vehicle Lab 1
 Credits16
Eighth Quarter
AM284 Automotive Dealership Experience 4 6
Human Relations requirement PSY101 recommended 3-4
 Credits9-10
 Total Credits104-108

How to Apply

The Chrysler Mopar College Automotive Program (MCAP), Individualized Mechanical Program Of Repair Technicians (IMPORT), and Subaru-U Automotive Technology programs are limited-entry programs. This means you must meet certain criteria before you can apply. These programs admit 24 students fall term on even-numbered years and odd-numbered years in the summer term. Students of all races, ethnicities, ages, genders, religions, sexual orientations, socio-economic statuses, nationalities, physical abilities, and cognitive differences are welcome!

AM103 Automotive Service Theory

Credits 2Summer - odd years/Fall - even years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

This course is the study of the basic theory and operation of automotive safety, tools and service procedures. Students study basic vehicle inspections and service processes, service manual usage, shop safety issues, precision tool usage, metric and standard measurement systems and general automotive shop procedures.

Additional Course Fee: $60.00

View Course Outcomes:

  1. Describe the pre-delivery inspection process
  2. Describe trouble points and their prevention within the oil change process
  3. Explain basic tool function and safety
  4. Explain how to access and use various automotive resources, such as service manuals, electrical diagrams, TSB's and tech support options
  5. Explain how to determine various fastener type, size, usage and repair methods.
  6. Explain how to find and decode VIN numbers
  7. Explain the basic oil change and vehicle inspection process.
  8. Explain the various hazards found in the automotive shops and how they pose danger to the technician
  9. Explain various shop procedures for checking out tools, vehicles, service manuals and accessing on-line training and information materials
  10. Explain various units of measure and conversions

AM104 Automotive Service Lab

Credit 1Summer - odd years/Fall - even years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

Students perform basic vehicle inspections, oil changes, vehicle maintenance, service manual exercises, precision tool measurements, shop safety procedures and general automotive shop operations.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Demonstrate how to access and use various automotive resources, such as service manuals, electrical diagrams, TSB's and tech support options
  2. Demonstrate how to properly use automotive shop equipment such as lifts, air hoses, exhaust fans, and general shop safety procedures.
  3. Demonstrate proper procedures when performing a vehicle oil change and inspection
  4. Identify various fasteners for type and size. Demonstrate proper procedures when torquing a bolt or fastener, and when performing a thread repair.
  5. Demonstrate the pre-delivery inspection process
  6. Identify the location and the types of fire extinguishers and other fire safety equipment
  7. demonstrate knowledge of the procedures for using fire extinguishers and other fire safety equipment
  8. Locate shop safety equipment, evacuation routes, eyewash station, and SDS sheets

AM105 Chassis Basic Theory

Credits 3Summer - odd years/Fall - even years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

Students perform basic inspections, removal, replacement and repair of automotive braking, steering and suspension system components. Emphasis is on suspension and steering system inspections, tire and wheel service, basic wheel alignment and disc and drum brake system service.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Describe a brake system's function, safety concerns and inspection and service procedure
  2. Describe the basic components of a steering and suspension system, including function, safety concerns, inspection and service procedures
  3. Describe the basic alignment angles that determine vehicle tire wear and directional control
  4. Describe how to perform a wheel balance and tire replacement

AM106 Chassis Basic Lab

Credit 1Summer - odd years/Fall - even years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

Students perform basic inspections, removal, replacement and repair of automotive braking, steering and suspension system components. Emphasis is on suspension and steering system inspections, tire and wheel service, basic wheel alignment and disc and drum brake system service.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Bleed and/or flush a brake system
  2. Inspect, clean, lubricate, adjust or replace the brake system components as needed
  3. Dismount, remount and balance a wheel assembly
  4. Inspect a steering and suspension system for worn, damaged or leaking components and replace as needed.
  5. Repair a tire, reinstall wheel and re-torque the lug nuts
  6. Perform a 4 wheel alignment that includes setting proper camber, caster and toe angles

AM112 Electrical 1 Theory

Credits 3Summer - odd years/Fall - even years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT automotive program; or instructor consent.

In this course students study the basic principles of electricity including voltage, amperage, resistance, series circuits, parallel circuits, series-parallel circuits, Ohms Law, induction and measuring techniques. In addition, instruction is provided on the theory, function and application of electrical principles of components commonly found in automotive battery, charging, starting, lighting and accessory systems.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Describe how to perform various automotive battery tests and service procedures. Explain the purpose of each test and how to interpret the results
  2. Describe how to perform various automotive charging system tests and service procedures. Explain the purpose of each test and how to interpret the results
  3. Describe how to perform various automotive starting system tests and service procedures. Explain the purpose of each test and how to interpret the results
  4. Explain basic ohms law, series and parallel circuits, voltage, resistance and current flow
  5. Explain how to measure voltage, resistance and amperage using digital multimeters
  6. Explain the purpose, construction and function of automotive batteries, charging, and starting systems.

AM113 Electrical 1 Lab

Credits 2Summer - odd years/Fall - even years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT automotive program; or instructor consent.

This course is the study of basic electrical system operation, testing and diagnosis. Students use electrical testing equipment to measure and interpret voltage, resistance and amperage measurements from series, parallel and series/parallel circuits. In addition, students test, service and diagnose the battery, charging and starting systems.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Measure voltage, amperage and resistance on parallel, series, and series-parallel circuits.
  2. Perform battery inspections, recharging process, jump starting, and state of charge and capacity tests.
  3. Perform charging system inspections, systems tests.
  4. Perform starting system current draw, control system, solenoid , and safety switch tests.
  5. Troubleshoot basic series/parallel circuit faults

AM114 Engines 1 Theory

Credits 2Summer - odd years/Fall - even years

Registration Requirement: Acceptance to the Chrysler MCAP, IMPORT or Subaru U program; or instructor consent.

In this course students study the fundamental theory, construction and operation of automotive internal combustion engines. Instruction is provided on engine cooling systems, lubrication systems, basic engine service and basic engine component fit and measurements.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Describe engine measurements such as compression ratio, displacement, leakage, HP and torque
  2. Explain basic internal combustion engine operation and function
  3. Explain basic purpose, construction and function of various engine components contained within the block and head assemblies; such as valves, springs, camshaft, crankshaft, pistons, connecting rods and rings
  4. Explain the purpose, construction and function of the engine cooling system
  5. Explain the purpose, construction and function of the engine lubrication system

AM115 Engines 1 Lab

Credit 1Summer - odd years/Fall - even years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT program; or instructor consent.

In this course students perform basic tests, inspections, removal and replacement of internal combustion engine cooling system, lubrication system, cylinder head and valve timing components.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Inspect and test cooling system for leaks and proper function. Test components such as; fan(s), fan clutch, fan shroud and air dams, radiator, hoses, coolant, and heater control system.
  2. Inspect lubrication system for leaks, measure pressures and replace sensors.
  3. Remove and replace timing belt or chain and inspect timing components.
  4. Remove cylinder head, inspect condition, perform required measurements, and make necessary measurements

AM140 Drivetrains 1 Theory

Credits 3Winter - even years/Spring - odd years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent

In this course students study basic principles and theory of hydraulically and electrically operated transmissions, transaxles, torque converters, manual transmissions and transaxles, differentials, drivelines, axles and clutches. Emphasis is on the general purpose and functions of each component working together within the assembly. Introduction to electronic controls and the hydraulic to electronic interaction is also discussed.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Discuss the diagnoses of transmission hard shifting and jumping out of gear concerns
  2. determine necessary action
  3. Explain and identify various bearing, thrust washers, gaskets and seals used within modern automotive transmissionstransaxle
  4. Explain basic hydraulic principles and their application in the modern automatic transmissiontransaxle
  5. Explain basic powerflow through automatic and manual transmission/transaxle gear systems
  6. Explain gear designs, ratios and usage in modern manual and automatic transmissiontransaxle and differentials
  7. Explain the basic operation of electronically control automatic and manual transmissiontransaxles
  8. Explain the basic theory and operation of the differential
  9. Explain the basic theory and operation of the driveline, u-joints and CV axles
  10. Explain the basic theory and operation of the torque converter
  11. Explain the lubrication system and fluid characteristics in transmissionstransaxle
  12. Explain the theory and operation of automatic transmissiontransaxle apply devices
  13. Explain the theory and operation of the clutch system

AM141 Drivetrains 1 Lab

Credit 1Winter - even years/Spring - odd years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent

Students will perform basic inspection, service, and repair of automotive manual and automatic transmissions and transaxles, differentials, transfer case, axles, U-joints, and clutches.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Demonstrate flushing oil coolers
  2. Demonstrate the service and repair of front CV axle joints
  3. Demonstrate the service and repair of u-joints and axles
  4. Identify and define the function of major components of automatic transmissions
  5. Identify and define the function of major components of manual transmissions
  6. Inspect and adjust clutch linkages
  7. Inspect and service transmission range switch
  8. Inspect and test the starting safety systems
  9. Inspect transmission mounts and linkages
  10. Inspect, bleed, and repair clutch hydraulic systems
  11. Perform stall and converter lock up tests
  12. Remove, replace and service the clutch, flywheel and related bearings
  13. Service automatic and manual transmission fluid and check for leaks
  14. Service differential fluid and check for leaks

AM142 Chassis 2 Theory

Credits 3Fall/Winter

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

This is a continuation of the study of the terminology, theory, service, repair, diagnostic and testing procedures related modern passenger vehicle and light truck brakes, steering and suspension systems. Emphasis will be on the diagnosis and functions of ABS and traction control systems, alignments, vehicle handling, tire pressure monitoring, tire wear and tire balancing.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Explain advanced alignment processes and how to correctly align a vehicle.
  2. Explain each alignment angle
  3. how each is measured, its functions, purpose, affect on tire wear and affect on vehicle handling.
  4. Explain the detailed operation of disc brake systems components.
  5. Explain the detailed operation of drum brake systems components.
  6. Explain the detailed operation of McPherson struts, lower and upper controls arms, knuckles, ball joints, sway bars, springs and torsion bars.
  7. Explain the detailed operation of steering linkages, rack and pinion gears, gear boxes, tie rods and power steering components.
  8. Explain the function, service and diagnosis of ABS and traction control systems.
  9. Explain the function, service and diagnosis of tire pressure monitoring systems.
  10. Explain the terminology, types and theory of tires, tire balancing, wear and repair.

AM143 Chassis 2 Lab

Credit 1Fall/Winter

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or consent.

In this course students will perform inspections, removal, replacement and repair of automotive braking system, steering and suspension systems. The focus will be on suspension and steering system repairs, alignments, Disc brakes repairs, and ABS brake system testing and service.

View Course Outcomes:

  1. Bleed and/or flush base brake systems and electronic brake control systems
  2. Check SAI, Set back, toe-out- on turns, and included angle.
  3. Diagnose tire pull, shimmy, and vibration problems.
  4. Flush, fill and bleed, and test power steering systems.
  5. Identify traction control/vehicle stability control system components.
  6. Inspect, remove and install front SLA components.
  7. Inspect, remove and install strut cartridge or assembly.
  8. Inspect, replace and adjust tie rods.
  9. Prepare vehicle for wheel alignment on alignment machine
  10. perform four-wheel alignment.
  11. Reset steering angle sensor.
  12. Retract and re-adjust caliper piston on an integral parking brake system.
  13. Test, diagnose and service electronic brake control system components.

AM154 Electrical 2 Theory

Credits 3Winter - odd years/Spring - even years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent.

Students study the basic terminology, theory, function, service, repair, diagnostic and testing procedures related to modern passenger vehicle and light truck engine performance systems. Emphasis is on basic electronic fuel injection inputs, ignition systems and the relationship of engine mechanical components to engine performance.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Explain how to interpret voltage, resistance and current flow measurements in simple automotive electrical circuits
  2. Explain ohms law, series and parallel circuits, voltage, resistance and current flow relationships in various automotive circuits
  3. Explain the basic setting, functions and attachments methods of lab scopes to automotive electrical components
  4. Explain the basic theory, operation and testing of modern vehicle communication systems
  5. Explain the basic theory, operation, safety and testing of modern vehicle occupant restraint components
  6. including air bags, sensors, wiring and modules
  7. Interpret basic lab scope patterns of various electrical components, identifying normal and abnormal pattern characteristics

AM155 Electrical 2 Lab

Credit 1Winter/Spring

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT automotive program; or instructor consent.

In this course students perform basic service, repair and diagnostic In this course students perform basic service, repair and diagnostic tests on vehicle electrical circuits including lighting, battery, starting and charging systems. In addition, students measure, test and explore the function of basic vehicle communication and occupant restraint systems. This course emphasizes the use of digital multimeters to measure and explore vehicle electrical system components and introduces the use of lab oscilloscopes.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Disable and enable supplemental restraint systems and verify indicator lamp operation
  2. Identify vehicle communication circuits
  3. Inspect and test switches, connectors, relays, wire and solenoid solid state devices found in electrical/electronic circuits
  4. Measure vehicle communication circuits using digital multimeters and scan tools
  5. Measure voltage, amperage and resistance on series/parallel circuits found on vehicle accessory systems using digital multimeters
  6. Perform battery, charging and starting system testing, inspection and diagnosis
  7. Perform solder repair of electrical wiring
  8. Set up and perform basic electrical system measurements using lab oscilloscopes
  9. Troubleshoot lighting and resistive circuit using electrical testing equipment such as: jumper wires, test lights and digital multimeters

AM158 Engine Performance 1 Theory

Credits 3Winter/Spring

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT automotive program; or instructor consent.

Students study the basic terminology, theory, function, service, repair, diagnostic and testing procedures related to modern passenger vehicle and light truck engine performance systems. Emphasis is on basic electronic fuel injection inputs, ignition systems and the relationship of engine mechanical components to engine performance.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Define the basic terminology of engine performance components related to input sensors, ignition systems and engine mechanical components related to performance
  2. Explain how to interpret voltage, resistance and current flow measurements in simple automotive electrical circuits
  3. Explain ohms law, series and parallel circuits, voltage, resistance and current flow relationships in various automotive circuits
  4. Explain the basic setting, functions and attachments methods of lab scopes to automotive electrical components
  5. Explain the basic theory of engine emissions gases and emission control systems
  6. Explain the basic theory, operation and testing of modern vehicle communication systems
  7. Explain the basic theory, operation, safety and testing of modern vehicle occupant restraint components
  8. including air bags, sensors, wiring and modules
  9. Explain the basic theory, operation, service, repair, diagnosis and testing procedures for the PCV system
  10. Explain the theory, operation, service, repair, diagnosis and testing procedures of engine mechanical systems that are related to engine performance. This will include compression, leakage and vacuum tests
  11. Explain the theory, operation, service, repair, diagnosis and testing procedures of various engine performance inputs
  12. Explain the theory, operation, service, repair, diagnosis and testing procedures of various engine performance outputs
  13. Explain the theory, operation, service, repair, diagnosis and testing procedures of various types of ignition systems. This will include electronic, DIS and COP types
  14. Interpret basic lab scope patterns of various electrical components, identifying normal and abnormal pattern characteristics

AM159 Engine Performance 1 Lab

Credits 2Winter/Spring

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent.

This course emphasizes the use of digital multimeters to measure and explore vehicle electrical system components and introduces the use of lab oscilloscopes. Students measure, explore, analyze and perform basic diagnostic tests on engine performance components and devices. The focus is on engine mechanical components related to performance, ignition systems and electronic fuel injection inputs.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Diagnose oil leaks, emissions and drivability concerns caused by the positive crankcase ventilation (PCV) system
  2. Identify, inspect and test ignition coils
  3. Identify, inspect and test ignition secondary wiring
  4. Identify, inspect and test ignition system function
  5. Identify, inspect and test ignition triggering device
  6. Inspect and test crankshaft and camshaft position sensor(s)
  7. Inspect and test engine coolant sensor
  8. Inspect and test engine performance sensors such as: MAP, TPS, and O2S
  9. Inspect, test and service positive crankcase ventilation (PCV) filter/breather cap, valve, tubes, orifices and hoses
  10. Perform cylinder cranking and running compression tests
  11. Perform cylinder leakage test
  12. Perform engine absolute manifold pressure tests
  13. Remove and replace spark plugs
  14. inspect secondary ignition components for wear and damage
  15. Troubleshoot lighting and resistive circuit using electrical testing equipment such as: jumper wires, test lights and digital multimeters

AM170 Automotive Project 1

Credit 1Winter - even years/Spring - odd years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT automotive program; or instructor consent.

In this course students study, research, discuss, write and present on topics such as new automotive technologies, various light repair and maintenance techniques, and topics related to brakes, suspension, electrical, drivetrain, and engine system. In addition, students are required to participate in approved service projects, automotive marketing/recruitment events, automotive skill contests and/or other approved activities.

View Course Outcomes:

  1. Create a presentation on a pre-approved topic relating to new automotive technologies, various light repair and maintenance techniques or less common automotive systems
  2. Demonstrate how to research automotive information resources and formulate a conclusion from the information
  3. Participate in an automotive event where students will be required to demonstrate any of the following skills: planning, organizing, providing security, presenting, managing, selling, producing, repairing, servicing and/or judging
  4. Present and answer questions related to an assigned automotive research topic

AM171 Chrysler MCAP, IMPORT Subaru-U E-Learning Fundamentals 1

Credit 1Fall/Winter

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

This is an e-learning on line course where students study fundamental vehicle services and systems studied during the dealership experience. Students reinforce topics covered during the terms on campus. This course utilizes an online learning and assessment system to achieve proficiency relevant to future coursework and employment.

View Course Outcomes:

  1. Explain fundamental automotive brake systems.
  2. Explain fundamental automotive electrical systems.
  3. Explain fundamental automotive electronic systems.
  4. Explain fundamental automotive internal combustion engines.
  5. Explain fundamental automotive steering & suspension systems.
  6. Explain fundamental automotive vehicle services.
  7. Explain safe shop practices.
  8. Identify fundamental automotive systems.

AM224 Engines 2 Theory

Credits 2Summer - even years/Fall - odd years

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT automotive program; or instructor consent.

This course is a continuation of the study of automotive internal combustion engine theory, construction and operation. Each individual component is studied and analyzed with emphasis on services and repair process, detailed component fit and measurements and individual component function within the engine assembly.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Explain detailed internal combustion engine operation and functions
  2. Explain detailed purpose, construction and function of the engine block components, including crankshaft, bearings, connecting rods, piston and rings
  3. Explain detailed purpose, construction and function of the engine head components including the valves, springs, rocker arms, seats and camshaft
  4. Explain various measurement methods when determining engine component oil clearance and fit
  5. Explain various method used to service and repair engine components, such as
  6. heads, blocks, connection rods, crankshafts, valves, guides and camshafts

AM225 Engines 2 Lab

Credit 1Summer - even years/Fall - odd years

Registration Requirement: acceptance into the Chrysler MCAP, IMPORT, Subaru-U program.

In this course students remove, inspect, measure and replace internal combustion engine components. Emphasis is on determining component clearances, failure analysis and assembly process on cylinder heads, valve train components, blocks, camshafts, crankshafts and piston assemblies.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Adjust valves to specification
  2. Assemble engine block and torque bolts to specification
  3. Deglaze and clean cylinder walls
  4. Demonstrate proper use of precision measuring tools (i.e. micrometer, dial-indicator, dial-caliper)
  5. Determine piston to bore clearance
  6. Disassemble engine block
  7. clean and prepare components for inspection and reassembly
  8. Inspect and measure crankshaft
  9. Inspect and measure cylinder walls/sleeves
  10. Inspect and measure piston skirts and ring lands
  11. Inspect and replace camshaft
  12. Inspect auxiliary shaft(s)/balance shafts
  13. Inspect engine block
  14. Inspect main and connecting rod bearings for damage and wear
  15. determine necessary action
  16. Inspect piston and rod assemblies
  17. Inspect, measure and install piston rings
  18. Inspect, measure and service valve train components. Determine necessary actions
  19. Install and establish camshaft position sensor indexing
  20. Install engine covers using gaskets, seals and sealers as required
  21. Remove, clean, inspect and replace cylinder head. Determine necessary actions
  22. Remove, inspect and replace valve lifters
  23. determine necessary action
  24. Remove, inspect or replace crankshaft vibration damper (harmonic balancer)

AM228 Engine Performance 2 Theory

Credits 4Summer/Fall

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

This is a continuation of the study of the terminology, theory, service, repair, diagnostic and testing procedures related to modern passenger vehicle and light truck engine performance systems. Emphasis is on electronic fuel injection inputs and outputs, intake air control systems, fuel supply systems and emission control devices.

Additional Course Fee: $55.00

View Course Outcomes:

  1. Define the terminology related to engine performance systems components, diagnostic tests and equipment
  2. Explain the theory, operation, service, repair, diagnosis and testing procedures of engine performance inputs, such as
  3. MAF, LAF, MAP, APP, TPS, O2S
  4. Explain the theory, operation, service, repair, diagnosis and testing procedures of various emission components, such as
  5. EGR, EVAP, catalytic converters
  6. Explain the theory, operation, service, repair, diagnosis,and testing procedures of the fuel delivery system

AM229 Engine Performance 2 Lab

Credits 2Summer/Fall

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

In this course students measure, service, repair, analyze and perform diagnostic tests on engine performance components and devices. The focus is on fuel supply systems, intake air control systems, emission control devices and electronic fuel injection inputs and outputs.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Identify, inspect and test electronic throttle controls system inputs, wiring and outputs
  2. Identify, Inspect and test fuel supply systems, pumps, and fuel injectors
  3. Identify, inspect and test various emission controls devices and systems such as EGR, EVAP, and Catalytic Converter.
  4. Identify, inspect, test input sensors, perform diagnostic tests, and analyze results on computerized engine control system sensors such as: MAP, MAF,CKP, CAM, LAF, TPS and ECT
  5. Inspect and test electronic control module's wiring, input values, output values, and functions.
  6. Inspect and test engine mechanical conditions that relate to engine performance
  7. Inspect and test idle control systems, throttle body, air induction system, intake manifold and gaskets for normal operation and problem diagnosis
  8. Perform active tests of actuators using
  9. scan tools, jumper wires and specialize testing equipment

AM232 Electrical 3 Theory

Credits 3Summer - even years/Fall - odd years

Registration Requirement: acceptance into the Chrysler MCAP, IMPORT, Subaru-U program.

Students study the theory, construction, operation and diagnosis of automotive computer-controlled components, accessory devices and vehicle communication systems. Instruction is provided on oscilloscope usage and advanced applications of electrical principles relating to electrical components and vehicle computer-controlled systems.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Describe how to measure and interpret CAN bus systems voltage and resistance values
  2. Describe the setup, purpose and function of triggers, time base, coupling and volts per division for oscilloscopes
  3. Describe the various communication systems used on automobiles
  4. Explain advanced application of ohms law and the relationships of voltage, current and resistance to series parallel and series-parallel circuits
  5. Explain how oscilloscope patterns can be used to determine the function and diagnosis of electrical components
  6. Explain how oscilloscope patterns can be used to determine the function and diagnosis of mechanical components
  7. Explain how the CAN bus communication system transmits data on modern vehicles
  8. Explain the application of ohms law and inductance to relays, motors, actuators and other electrical devices
  9. Explain the function, purpose and applications of amp probe testing with DMM and oscilloscopes
  10. Explain the safety aspects of supplemental restraint systems (SRS), electronic brake control systems and hybrid vehicle high voltage circuits
  11. Interpret oscilloscope traces produced from amp probes, pressure transducers and voltage probes

AM233 Electrical 3 Lab

Credit 1Summer - even years/Fall - odd years

Registration Requirement: Acceptance into the Chrysler MCAP, IMPORT, Subaru-U program.

In this course students measure and interpret various voltage, resistance and current values to explore the function and diagnosis of electrical and electronic circuits. Emphasis is on the advanced use of oscilloscope and digital multi-meters while performing service, repair and diagnostic procedures on electrical accessory, computer-controlled and vehicle communication systems.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Demonstrate various measurements methods to determine current values in electrical circuits
  2. Demonstrate various measurements methods to determine resistance values in electrical circuits
  3. Demonstrate various measurements methods to determine voltage and voltage drop values in electrical circuits
  4. Diagnose electrical circuit faults in vehicle lighting, communications and accessory systems
  5. Inspect, test and diagnose faults in vehicle communications systems
  6. Inspect, test and measure voltage, scan data and labscope patterns of vehicle communications systems
  7. Interpret current measurements in various vehicle electrical circuits
  8. Interpret resistance measurements in various vehicle electrical circuits
  9. Interpret voltage and voltage drop measurements in various vehicle electrical circuits
  10. such as wiper and horn
  11. Set-up, save and interpret labscope patterns of various electrical components using voltage and current probes

AM238 Air Conditioning Theory

Credits 3Summer/Fall

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or consent.

In this course students study the theory, function and operation of automotive air conditioning and heating systems and the related components. Instruction includes A/C certification and safety requirements, various testing methods and procedures, and proper service, repair, and diagnosis operations.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Describe A/C system diagnostic process for leak testings methods, performance testing, odors, poor performance and control issues
  2. Describe A/C system safety precautions and safety issue when servicing and repairing A/C systems
  3. Describe the inputs, outputs and decision processes within the automatic climate control system
  4. Describe the purpose, variations and legal requirements of automotive refrigerants and lubricants
  5. Describe the service, repair, and replacement processes for various A/C and heating components
  6. Explain causes, diagnosis and solutions for A/C systems that suffer from poor performance issues
  7. Explain the function of electrical control devices and how each are tested
  8. Explain the processes, purposes, function and theory of A/C recovery, evacuation and recharging
  9. Explain the theory, function, operation, and diagnosis of lines, accumulators, receiver dryers, ducting, control devices, condensers, evaporators and heating system components
  10. Explain the theory, function, operation, and diagnosis of orifice and expansion valve A/C systems

AM239 Air Conditioning Lab

Credit 1Summer/Fall

Registration Requirement: Acceptance to the Chrysler MCAP or IMPORT or Subaru U program; or instructor consent.

In this course students will perform automotive A/C and heating system inspection, testing, service and repair. Emphasis will be on performing system component identifications, performance testing, recovering, evacuation and recharging, component testings and diagnosis.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Check operation of automatic or semi-automatic heating, ventilation and air-conditioning control systems
  2. determine necessary action.
  3. Determine procedures to remove inspect and reinstall heater core, evaporator, and other heating and A/C components.
  4. Diagnose A/C system for issues with: compressor clutch control, vacuum components, mechanical components, electrical components, controls of the heating, ventilation and A/C ducting, and blower motors
  5. determine necessary action
  6. Identify and interpret heating and air conditioning problems such as: loss of cooling, loss of heating, abnormal operating noises, abnormal air flow from ducting
  7. determine necessary actions.
  8. Identify safety issues related to AC service. Properly recycle, label, and store A/C oils and refrigerant.
  9. Identify, remove and inspect selected AC components.
  10. Inspect evaporator housing water drain, A/C-heater ducts, doors, hoses, cabin filters and outlets, condenser airflow, drive belts, pulleys and tensioners
  11. determine necessary action
  12. Inspect, test, service or replace A/C compressor clutch components and/or assembly
  13. check compressor clutch air gap
  14. adjust as needed
  15. Perform A/C system tests including: leakage, performance, electrical components, condenser, refrigerant identification, pressure, temperature, compressor clutch, ducting, climate control, blower motor.
  16. Recover, Evacuate, and recharge AC system refrigerant. Determine recommended type and capacity of oil and refrigerant for system application.
  17. Troubleshoot and diagnosis A/C systems using tools such as: scan tool, pressure gauge, DMM, and others.

AM242 Electrical 4 Theory

Credits 3Winter - odd years/Spring - even years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent.

Students continue the study of the theory, operation and diagnostic procedures of electrical accessory, computer-controlled and vehicle communication systems. In addition, instruction is provided on the theory, service, repair and diagnosis of the supplemental restraint systems. This course emphasizes the theory and application of electrical testing equipment and data interpretation for troubleshooting and diagnosing electrical and electronic components and computer controlled systems. Students study various diagnostic methods, tests and processes to isolate malfunction in automotive computer controlled systems.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Describe the operation of keyless entry/remote-start systems
  2. Describe the operation of single and dual stage supplemental restraint system deployment [SRS]
  3. Describe the service, calibration, and repair procedures of the SRS system
  4. Describe the sources of EMI and how it is controlled
  5. Explain how computer controlled inputs are used to make decisions and how output devices are controlled
  6. Explain the operation, testing, service and diagnosis of computer controlled vehicle accessory systems
  7. Explain the test methods and diagnostic procedure used to identify problem sensor, output devices, and control modules in various automotive computercontrolled systems
  8. Explain the test methods and diagnostic procedure used to identify problem wires and connectors in variousautomotive electrical and electronic systems
  9. Explain the theory, function and application of capacitors in vehicle electrical systems

AM243 Electrical 4 Lab

Credit 1Winter - odd years/Spring - even years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent

Students perform service, repair and diagnostic procedures on advanced electrical accessory, computer-controlled and supplemental restraint systems. This course emphasizes using electrical testing equipment to collect data and the interpretation of that data to troubleshoot and diagnose electrical components, vehicle communications, supplemental restraint and computer-controlled systems. Students test, interpret and diagnosis vehicle engine performance, communication and accessory system faults. Emphasis is on the diagnostic process, use of testing equipment, interpreting test data and determining solutions.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Demonstrate knowledge of the causes and effects from shorts, grounds, opens and resistance problems in electrical/electronic circuits
  2. Demonstrate the diagnosis of electrical and electronic system components by using various automotive test equipment such as
  3. oscilloscopes, digital multimeters, scan tools and amp probes
  4. Demonstrate using service information, step-by-step diagnosis, and the three C’s (concern, cause and correction) diagnosis process.
  5. Diagnose (troubleshoot) electrical issues related to engine performance and emissions problems
  6. determine necessary action
  7. Diagnose (troubleshoot) the causes of brighter-than-normal, intermittent, dim or no light operation
  8. Diagnose engine mechanical, electrical, electronic, fuel and ignition concerns
  9. determine necessary action
  10. Diagnose faults in vehicle computer controlled systems such as
  11. vehicle anti-theft systems, power windows, power door locks and climate control systems
  12. Diagnose faults in vehicle electrical components such as
  13. relays, gauges, sending units, wipers and horns, lighting systems
  14. Identify, inspect and test occupant restraint air bags system components
  15. Interpret oscilloscope, digital multimeter, scan tool, amp probe and other test equipment data to explain the function of electrical and electronic system components
  16. Use wiring diagrams to trace and diagnose electrical/electronic circuits

AM244 Drivetrains 2 Theory

Credits 2Winter - odd years/Spring - even years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent.

This is a continuation of the study of principles and theory of hydraulically and electrically operated transmissions, transaxles, torque converters, manual transmissions and transaxles, differentials, drivelines, axles and clutches. Emphasis is on the detailed purpose and functions of each component working together within the assembly. Electronic controls and the hydraulic to electronic interaction are discussed and related to vehicle diagnosis. Students also study NVH principles, measurement methods and diagnostics.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Describe the operational characteristics of a continuously variable transmission (CVT)
  2. Describe the operational characteristics of an electronically-controlled automatic transmission/transaxle
  3. Discuss the diagnoses noise concerns through the application of transmission/transaxle powerflow principles
  4. Discuss the diagnoses of clutch noise, binding, slippage, pulsation and chatter
  5. Explain the advance operation of electronically controlled transmission/transaxles
  6. Explain the advance theory and operation of the differential, axles and driveline components
  7. Explain the function, diagnosis, and repair of automatic transmissions, transfer cases, and differentials.
  8. Identify advanced powerflow in automatic transmission/transaxles
  9. Identify and interpret transmission/transaxle concern, differentiate between engine performance and transmission/transaxle concerns

AM245 Drivetrains 2 Lab

Credits 3Winter - odd years/Spring - even years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent.

In this course students service, repair and rebuild automatic transmissions and transaxles, differentials, and transfer cases. Students also inspect, measure and diagnose noise and vibrations concerns related to engines, chassis and transmission systems.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Diagnose electronic transmission/transaxle control systems, power flow, electronic input/output, and hydraulic pressure concerns using various testing equipment.
  2. Diagnose noise and vibration concerns
  3. Diagnose transmission/transaxle gear reduction/multiplication concerns using driving, driven and held member (power flow) principles
  4. Disassemble, clean and inspect and assemble transmission/transaxle
  5. Disassemble, inspect, measure and adjust or replace and reassemble differential components
  6. Disassemble, service and reassemble transfer case and components
  7. Inspect bushings, gears, case, thrust washer, clutches, band and other automatic transmission/transaxles hard components
  8. Inspect converter flex (drive) plate and torque converter
  9. Inspect, measure, repair, adjust or replace transaxle final drive components
  10. Inspect, test and adjust transmission electrical/electronic components and circuits
  11. Measure and inspect transmission/transaxle end play, clutch pack clearance, oil pump assemblies, valve bodies,
  12. Pressure test and air test operation of clutch and servo assemblies

AM246 Engine Performance 3 Theory

Credits 3Winter - odd years/Spring - even years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent.

Students study the advanced terminology, theory, service, repair, diagnostic and testing procedures related to modern passenger vehicle and light truck engine performance systems. Emphasis is on the diagnosis of electronic fuel injection systems, OBDII systems and emission controls systems. Introductory Hybrid and Diesel service and repair materials will be covered.

Additional Course Fee: $5.00

View Course Outcomes:

  1. Describe how the emissions are controlled on Diesel engines.
  2. Describe the regulations and requirements of OBDII systems
  3. Describe the safety and diagnostic procedures related to hybrid and electric vehicle service and repair.
  4. Describe various diagnostic method that can be used to determine which component is the cause of a drivability concern
  5. Explain how the electronic fuel injection sensors, output devices and computer modules work together to control emissions of the engine and fuel system
  6. Explain how the electronic fuel injection sensors, output devices and computer modules work together to control power output and drivability of modern vehicles
  7. Explain how to interpret test data to isolate potential causes of emission and drivability concerns
  8. Explain the differences between gasoline and Diesel engines and fuel systems.
  9. Explain the theory, operation, service, repair, diagnosis and testing procedures of emission control systems
  10. Explain the theory, operation, service, repair, diagnosis and testing procedures of fuel injection control modules
  11. Explain the theory, operation, service, repair, diagnosis and testing procedures of OBDII monitors, sensors and modules

AM247 Engine Performance 3 lab

Credit 1Winter - odd years/Spring - even years

Registration Requirement: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent

This course is a continuation of the measurement, service, repair, analyzing and performing diagnostic tests on engine performance components and devices. The focus is on diagnosing OBDII systems, emission control systems and electronic fuel injection control modules. Introductory Diesel will also be covered.

Additional Course Fee: $35.00

View Course Outcomes:

  1. Diagnose emissions or driveability concerns without stored diagnostic trouble codes
  2. Diagnose the causes of emissions or driveability concerns with stored or active diagnostic trouble codes
  3. Identify and interpret engine performance concerns
  4. Inspect and test OBDII sensor, devices and control units
  5. Inspect, test and/or replace ignition control module, powertrain/engine control module
  6. Inspect, test, and diagnose evaporative and exhaust gas recirculation emission systems
  7. Interpret diagnostic trouble codes (DTCs) and scan tool data related to the emissions control systems
  8. Service Diesel fuel system components

AM248 Electric Vehicle Theory

Credits 2Winter - odd years/Spring - even years

Registration Requirement: Recommended Requisite: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent.

Students will learn the theory on how to safely identify, work on and diagnose Hybrid and Electric Vehicles.

View Course Outcomes:

  1. Describe how to safely service Hybrid and Electric Vehicles.
  2. Describe the safety systems on Hybrid and Electric Vehicles.
  3. Describe the testing and diagnosis of basic Hybrid and Electric Vehicle systems.
  4. Explain how specialty tooling is used on Hybrid and Electric Vehicles.
  5. Explain Hybrid and Electric Vehicle cooling systems and HVAC system functions.
  6. Explain how Electric and Hybrid Electric Vehicles charge, propel the vehicle, and regenerate vehicle motion.

AM249 Electric Vehicle Lab

Credit 1Winter - odd years/Spring - even years

Registration Requirement: Recommended Requisite: Acceptance in the MCAP, IMPORT, or Subaru U program or instructor consent.

The student will learn how to perform hands-on tasks and diagnosis tests on Hybrid and Electric Vehicles.

View Course Outcomes:

  1. Safely perform the power up and power down process of the high voltage system.
  2. Demonstrate how to safely diagnose, service, and repair Hybrid and Electric Vehicles.
  3. Demonstrate how to use high voltage test equipment to test, service, and repair Hybrid and Electric Vehicles.
  4. Demonstrate how to use specialty tools to service and repair Hybrid and Electric Vehicles.

AM281 Automotive Dealership Experience 1

Credits 6Fall/Winter

Registration Requirement: Acceptance into the Chrysler MCAP or IMPORT program.

In this course the student will work a minimum of 200 hours with a mentoring technician in an automotive repair facility. The goal is to gain experience in oil and filter changing, shop processes, and basic vehicle service and repair procedures. In agreement with specific employers, a program instructor will coordinate the student's placement and work experience.

View Course Outcomes:

  1. Describe the functions of the parts personnel, lot attendees, service writer, service manager, warranty clerk, and technician
  2. Describe the steps involved in the basic service, repair, and verification of passenger vehicles
  3. Demonstrate positive work ethic behaviors, such as: time management skills, following attendance and tardy policies, initiative, judgment, dependability, co-worker relations, and attitude
  4. Demonstrate proper shop behaviors, such as: care of shop equipment, safe work practices, and providing a clean work environment
  5. Demonstrate on-the-job technical competency such as: quality of work, technical knowledge, hands on skills, and quantity of work

AM282 Automotive Dealership Experience 2

Credits 6Summer - odd years/Spring - even years

Registration Requirement: Acceptance into the Chrysler MCAP, IMPORT or Subaru-U program.

The student will be employed a minimum of 200 hours per term in an automotive repair facility. Through agreement with the employer, a program instructor coordinates the student's work experience with his/her college studies. The expectation in each dealership experience is for the student to complete increasingly complex tasks and work with increasing independence.

View Course Outcomes:

  1. Demonstrate on-the-job technical competency such as: quality of work, technical knowledge, hands on skills, and quantity of work
  2. Demonstrate positive work ethic behaviors, such as: time management skills, following attendance and tardy policies, initiative, judgment, dependability, co-worker relations, and attitude
  3. Demonstrate proper shop behaviors, such as: care of shop equipment, safe work practices, and providing a clean work environment
  4. Describe the functions of the parts personnel, lot attendees, service writer, service manager, warranty clerk, and technician
  5. Describe the steps involved in the diagnosis, repair, and verification of a vehicle in need of repair

AM283 Automotive Dealership Experience 3

Credits 6Fall - even years/Winter - even years

Registration Requirement: Acceptance into the Chrysler MCAP, IMPORT or Subaru U program.

The student will be employed a minimum of 200 hours per term in an automotive repair facility. Through agreement with the employer, a program instructor coordinates the student's work experience with his/her college studies. The expectation in each dealership experience is for the student to complete increasingly complex tasks and work with increasing independence.

View Course Outcomes:

  1. Demonstrate on-the-job technical competency such as: quality of work, technical knowledge, hands on skills, and quantity of work
  2. Demonstrate positive work ethic behaviors, such as: time management skills, following attendance and tardy policies, initiative, judgment, dependability, co-worker relations, and attitude
  3. Demonstrate proper shop behaviors, such as: care of shop equipment, safe work practices, and providing a clean work environment
  4. Describe the functions of the parts personnel, lot attendees, service writer, service manager, warranty clerk, and technician
  5. Describe the steps involved in the diagnosis, repair, and verification of a vehicle in need of repair

AM284 Automotive Dealership Experience 4

Credits 6Summer - even years/Spring - odd years

Registration Requirement: Acceptance into the Chrysler MCAP or IMPORT program.

The student will be employed a minimum of 200 hours per term in an automotive repair facility. Through agreement with the employer, a program instructor coordinates the student's work experience with his/her college studies. The expectation in each dealership experience is for the student to complete increasingly complex tasks and work with increasing independence. During this final Co-op phase, students will need to take and pass a minimum of 4 automotive ASE tests. Proof of completion will need to be submitted to your instructor prior to the final day of the term.

View Course Outcomes:

  1. Demonstrate on-the-job technical competency such as: quality of work, technical knowledge, hands on skills, and quantity of work
  2. Demonstrate positive work ethic behaviors, such as: time management skills, following attendance and tardy policies, initiative, judgment, dependability, co-worker relations, and attitude
  3. Demonstrate proper shop behaviors, such as: care of shop equipment, safe work practices, and providing a clean work environment
  4. Describe the functions of the parts personnel, lot attendees, service writer, service manager, warranty clerk, and technician
  5. Describe the steps involved in the diagnosis, repair, and verification of a vehicle in need of repair
  6. Take and pass a minimum of 4 automotive ASE tests.